TRIPLE CROWN SERIES RULES

Tentative 12.13.2019

6700lb. STREET LICENSED

GASOLINE 4X4 TRUCKS

The rules promulgated in these rules are intended as guidelines for the sport of Open Street Licensed Gasoline 4×4 truck pulling.  These rules have been adopted by Full Pull Productions, Inc. for the 2020 season. Nothing herein should be construed as a guarantee against injury or death to participants, crewmen, family members, bystanders or spectators.  Each participant at a Full Pull Productions pulling event must assure that their equipment and replacement equipment throughout the season meets the requirements for this class. Trucks that regularly compete in Work Stock Gas type classes  are not eligible for this class.  Any truck that dominates may be moved up a class.

  1. No front mounted weights/hidden weights – No weights in cab
  2. Front Interior must be as OEM intended—No Race Seats, etc.
  3. Current Registration and Current Photo Driver’s License
  4. Current Inspection Sticker/License Must match State Issued in
  5. Must be an OEM available engine, No Major Modifications to engine. Single 4 Barrel or Factory injection. Any conventional type heads -No billet, Pro-stock heads. No injectables such Nitrous, etc.  No power adders unless OEM factory. Must have a factory type exhaust system with a working mufflers – no open headers
  6. Must Use Factory Engine Mounts / Engine in Factory OEM Location
  7. Wheels must have DOT Stamp –No “Real” or other types of wheels- Must maintain OEM Stagger – Tires must be unaltered with DOT Stamp
  8. Hole in hitch must be 3 ¾ in diameter
  9. Reese Style Hitch – See Diagram for legal hitch
  10. No Major Suspension modifications.  Traction Bars-Etc. – Bolt on only- Two inches of downward suspension travel required –
  11. All cooling for the truck must be located in the factory locations; IE Transmissions coolers, Radiators, etc. Radiator must be of factory size and in OEM location and used
  12. Reese Style Hitch – See Diagram for legal hitch

https://fullpullproductions.com/wp-content/uploads/2016/11/word-image.jpeg

LEGAL HITCH SET-UP

  • 26” inch Hitch Height
  • If you back your truck to a wall the hitch would hit first
  • Reese Type Hitch attached to the frame within 8” inches of rear of truck
  • Opening minimum of 3.5” X 3.75”inches

=====================================================

8500lb. STREET LICENSED

DIESEL 4X4 TRUCKS

The rules promulgated in these rules are intended as guidelines for the sport of Open Street Licensed Diesel 4×4 truck pulling.  These rules have been adopted by Full Pull Productions, Inc. for the 2020 season. Nothing herein should be construed as a guarantee against injury or death to participants, crewmen, family members, bystanders or spectators.  Each participant at a Full Pull Productions’ pulling event must assure that their equipment and replacement equipment throughout the season meets the requirements for this class. Trucks that regularly compete in 2.5 Diesel are not eligible for this class. Any truck that dominates may be moved up a class.

No front mounted weights – No weights in cab

Current Registration and Current Photo Driver’s License

Current Inspection Sticker/License- Must match State Issued In

Wheels must have D.O.T Stamp- No “Real” or likewise wheels – Must maintain OEM Stagger – Tires must be unaltered with DOT Stamp

Factory Turbo Charger or USA-East approved 2.5 replacement

Turbos may be measured and must meet the 2.5 Rules

All Air Intake must be in the engine compartment-No Intake in Non-OEM grill holes, headlights etc.

Factory Fuel Pump / Dual pumps allowed

All Headlights must be in OEM location and functional

Front Interior must be as OEM intended—No Race Seats, etc.

No Major Modifications to engine Must be a OEM available engine (Factory OEM Type Heads & Material)

Must Use Factory Engine Mounts / Engine in Factory OEM Location

Hole in hitch must be 3 ¾ in diameter

See Diagram for legal hitch (Factory style Reese is legal as well)

No Major Suspension modification.  Traction Bars-Etc. – Bolt on only- Two (2) inches of downward suspension travel required

Radiator must be of factory size and in OEM location and used

All cooling for the truck must be located in the factory locations; IE Transmissions coolers, Radiators, etc.

https://fullpullproductions.com/wp-content/uploads/2016/11/word-image.jpeg

LEGAL HITCH SET-UP

  • 26” inch Hitch Height
  • If you back your truck to a wall the hitch would hit first
  • Reese Type Hitch attached to the frame within 8” inches of rear of truck
  • Opening minimum of 3.5” X 3.75”inches
Scroll to Top